Industrial L2+ 24-Port 10/100/1000T + 4-Port 10G SFP+ Managed Ethernet Switch
» IGS-R4215-24T4X
Budget-friendly High-speed L2/L4 Industrial Switch for Harsh Environments
The IGS-R4215-24T4X is PLANET's latest Industrial-grade, Rack-mount L2+ Managed Gigabit Switch, designed for heavy industrial environments in a 1U fanless design. With IPv6/IPv4 dual stack management, a built-in Layer 3 static routing capability, and a powerful L2/L4 Gigabit switching engine, this switch delivers an array of versatile features for industrial settings. Featuring 24 10/100/1000BASE-T ports, 4 10GBASE-X SFP+ fiber slots and a USB Type C console port, the IGS-R4215-24T4X ensures unwavering, stable performance. Operating flawlessly and quietly within a temperature range of -40 to 75 degrees Celsius, it showcases remarkable adaptability.
High Performance 10Gbps Ethernet Capability
The four SFP+ ports built in the IGS-R4215-24T4X boasts a high-performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as up to 128Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Each of the SFP+ ports supports 4 speeds, 10GBASE-SR/LR, 2500BASE-X, 1000BASE-SX/LX and 100BASE-FX, meaning the administrator can choose the transmission speed required to extend the network efficiently.
Redundant Ring, Fast Recovery for Critical Network Applications
The IGS-R4215-24T4X supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology and Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in harsh environments.
Digital Input and Digital Output for External Alarm
The IGS-R4215-24T4X supports Digital Input and Digital Output through a terminal block located on its front panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-R4215-24T4X port shows link down, link up or power failure.
Effective Alarm Alert for Better Protection
The IGS-R4215-24T4X incorporates a Fault Alarm feature that promptly notifies users of any issues with the switches. This valuable feature eliminates the need for users to spend time locating the problem, resulting in significant time and human resource savings.
Layer 3 IPv4 and IPv6 VLAN Routing for Secure and Flexible Management
The IGS-R4215-24T4X switch not only provides ultra high transmission performance, and excellent Layer 2 and Layer 4 technologies, but also Layer 3 IPv4 and IPv6 VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly-secure, flexibly-managed and simple networking application.
Robust Layer 2 Features
The IGS-R4215-24T4X can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the IGS-R4215-24T4X allows the operation of a high-speed trunk to combine with multiple ports, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.
Efficient Traffic Control
The IGS-R4215-24T4X is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast/unicast storm control, per port bandwidth control, 802.1p/CoS/IP DSCP QoS priority and remarking. It guarantees the best performance in VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.
Cybersecurity Network Solution to Minimize Security Risks
The IGS-R4215-24T4X supports SSHv2 and TLS protocols to provide strong protection against advanced threats. It includes a range of cybersecurity features such asDHCP Snooping, IP Source Guard, Dynamic ARP Inspection Protection, RADIUS and TACACS+ user accounts management, SNMPv3 authentication, and so on to complement it as an all-security solution.
User-friendly Management Interfaces
For efficient management, the IGS-R4215-24T4X is equipped with console, Web and SNMP management interfaces.
With the built-in Web-based management interface, the IGS-R4215-24T4X offers an easy-to-use, platform-independent management and configuration facility.
For text-based management, the switches can be accessed via Telnet and the console port.
For standard-based monitor and management software, it offers SNMPv3 connection which encrypts the packet content at each session for secure remote management.
Moreover, the IGS-R4215-24T4X offers secure remote management by supporting SSHv2, TLSv1.2 and SNMP v3 connections which encrypt the packet content at each session.
IPv6/IPv4 Dual Stack Management
Supporting both IPv6 and IPv4 protocols, the IGS-R4215-24P4X helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up.
Intelligent SFP Diagnosis Mechanism
The IGS-R4215-24T4X supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
Redundant AC/DC Power Supply to Ensure Continuous Operation
The IGS-R4215-24T4X is particularly equipped with one 100~240V AC power supply unit and dual 24~60V DC power supply unit to provide an enhanced reliable and scalable redundant power supply. The continuous power system is specifically designed to fulfill the demands of high-tech facilities requiring the highest power integrity. With the 24~60V DC power supply, the IGS-R4215-24T4X is able to act as a telecom-level device that can be located in the electronic room.
Remote Management Solution
PLANET's Universal Network Management System (UNI-NMS), NMSViewerPro and CloudViewerPro app provide robust support for IT staff in effectively managing and monitoring all network devices, including the IGS-R4215-24T4X, from remote locations. Tailored for deployment in both enterprises and industries where the IGS-R4215-24T4X is utilized remotely, these systems enable the identification of bugs or faulty conditions without the need for on-site visits. With PLANET’s Remote Management Solution, businesses of all types can now be swiftly and efficiently managed through a unified platform, streamlining operational oversight.
Redundant Ring, Fast Recovery for Critical Network Applications
The IGS-R4215-24T4X supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments.
Industrial-grade Switch for Security and Automation
The IGS-R4215-24T4X’s is particularly designed for heavy industries, such as factories, harbors, warehouses, and more. It is suitable for buildings where security is strictly enforced. With 24 1000BASE-T ports and 4 10GBASE-X SFP+ fiber optic uplink interfaces, the IGS-R4215-24T4X can easily build an IP phone system, IP surveillance system, security control system and wireless AP group in the harsh Industrial environment.
Physical Port
24 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
4 10GBASE-SR/LR SFP+ slots, backward compatible with 100/1G/2.5GBASE-X SFP transceivers
One USB Type C console interface for basic management and setup.
Hardware Conformance
One 100 to 240V AC or dual 24 to 60V DC power input, redundant power with reverse polarity protection
Active-active redundant power failure protection
Backup of catastrophic power failure on one supply
Fault tolerance and resilience
19-inch rack-mountable design
IP30 metal case
Supports EFT protection for 6KV DC power and 6KV DC Ethernet ESD protection
-40 to 75 degrees C operating temperature for DC power input
-10 to 60 degrees C operating temperature for AC power input
Digital Input and Digital Output
2 digital input (DI)
2 digital output (DO)
Integrate sensors into auto alarm system
Transfer alarm to IP network via SNMP trap
Switching
Hardware-based 10/100Mbps (half/full duplex), 1000Mbps (full duplex mode), auto-negotiation, and auto MDI/MDI-X
Features Store-and-Forward mode with wire-speed filtering and forwarding rates
IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
16K MAC address table size
12K jumbo frame
Automatic address learning and address aging
Supports CSMA/CD protocol
Layer 3 IP Routing Features
Supports maximum 32 static routes and route summarization
Routing interface provides per VLAN routing mode
Layer 2 Features
Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
High performance Store and Forward architecture, broadcast storm control, and runt/CRC filtering that eliminates erroneous packets so as to optimize the network bandwidth
Supports VLAN
IEEE 802.1Q tagged VLAN
Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) support
Protocol VLAN
Voice VLAN
Private VLAN (Protected port)
Management VLAN
GVRP
Supports Spanning Tree Protocol
STP (Spanning Tree Protocol)
RSTP (Rapid Spanning Tree Protocol)
MSTP (Multiple Spanning Tree Protocol)
STP BPDU Guard, BPDU Filtering and BPDU Forwarding
Supports Link Aggregation
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Cisco ether-channel (Static Trunk)
Maximum 8 trunk groups, up to 8 ports per trunk group
Provides port mirror (many-to-1)
Loop protection to avoid broadcast loops
Supports ERPS (Ethernet Ring Protection Switching)
Link Layer Discovery Protocol (LLDP)
Quality of Service
Ingress/Egress Rate Limit per port bandwidth control
Traffic classification
IEEE 802.1p CoS
TOS/DSCP/IP Precedence of IPv4/IPv6 packets
Strict priority and Weighted Round Robin (WRR) CoS policies
Multicast
Supports IPv4 IGMP snooping v2 and v3
Supports IPv6 MLD snooping v1, v2
IGMP querier mode support
IGMP snooping port filtering
MLD snooping port filtering
Security
Storm Control support
Broadcast / Multicast / Unknown Unicast
Authentication
Built-in RADIUS client to co-operate with the RADIUS servers
DHCP Option 82
RADIUS/TACACS+ login user access authentication
Access Control List
IPv4/IPv6 IP-based ACL
IPv4/IPv6 IP-based ACE
MAC-based ACL
MAC-based ACE
MAC Security
Static MAC
MAC Filtering
Port Security for Source MAC address entries filtering
DHCP Snooping to filter distrusted DHCP messages
Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
IP Source Guard prevents IP spoofing attacks
DoS Attack Prevention
Management
IPv4 and IPv6 dual stack management
Switch Management Interface
Web switch management
Console/Telnet Command Line Interface
SNMP v1 and v2c switch management
SSHv2, TLSv1.2 and SNMP v3 secure access
SNMP Management
SNMP trap for interface Link Up and Link Down notification
Four RMON groups (history, statistics, alarms, and events)
User Privilege Levels Control
Built-in Trivial File Transfer Protocol (TFTP) client
BOOTP and DHCP for IP address assignment
System Maintenance
Firmware upload/download via HTTP/TFTP
Configuration upload/download through HTTP/TFTP
Dual Images
Hardware reset button for system reboot or reset to factory default
SNTP Network Time Protocol
Network Diagnostic
Cable Diagnostics
ICMPv6/ICMPv4 Remote Ping
SFP-DDM (Digital Diagnostic Monitor)
Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
Event message logging to remote Syslog server
PLANET Smart Discovery Utility for deployment management
PLANET NMS system and NMSViewerPro/CloudViewerPro App for deployment management
Hardware Specifications | |
|---|---|
Copper Ports | 24 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports (Ports 1 to 24) |
SFP+ | 4 10GBASE-SR/LR SFP+ interfaces (Ports XG1 to XG4) |
Console | 1 x USB Type C to RS232 serial port (115200,8, N, 1) |
Reset Button | < 5 sec: System reboot |
Terminal Block | Removable 6-pin terminal block |
Alarm | One relay output for port breakdown and power failure. |
Digital Input (DI) | 2 digital input (DI) |
Digital Output (DO) | 2 digital output (DO) |
Enclosure | IP30 metal case |
Installation | Rack-mount kit |
Dimensions (W x D x H) | 444 x 200 x 44.2 mm, 1U height |
Weight | 2826g |
Power Requirements | DC: 24-60V, 1.5A (max.) |
Power Consumption/ Dissipation | DC: |
EFT Protection | 6KV DC |
ESD Protection | 6KV DC |
Switching Specifications | |
Switch Architecture | Store-and-forward |
Switch Fabric | 128Gbps/non-blocking |
Switch Throughput@64Bytes | 95.23Mpps @64Bytes |
Address Table | 16K MAC address table with auto learning function |
Shared Data Buffer | 12Mbits |
Flow Control | IEEE 802.3x pause frame for full duplex |
Jumbo Frame | 12KBytes |
Layer 2 Functions | |
Port Mirroring | TX/RX/both |
VLAN | 802.1Q tag-based VLAN |
Link Aggregation | IEEE 802.3ad LACP/Static Trunk |
IGMP Snooping | IPv4 IGMP (v2/v3) Snooping |
MLD Snooping | IPv6 MLD snooping v2, v3, up to 256 multicast groups |
Ring | Supports ERPS, and complies with ITU-T G.8032 |
Security Functions | |
Access Control List | IPv4/IPv6 IP-based ACL/MAC-based ACL |
Port Security | Built-in RADIUS client to co-operate with RADIUS server |
MAC Security | IP-MAC port binding |
Enhanced Security | DHCP Snooping and DHCP Option82 |
Layer 3 Functions | |
IP Interfaces | Max. 64 VLAN interfaces |
Routing Table | Max. 32 routing entries |
Routing Protocols | IPv4 hardware static routing |
Management Functions | |
Basic Management Interfaces | USB to RS232 console |
Secure Management Interfaces | SSHv2, TLS v1.2, SNMP v3 |
Event Management | Remote/Local Syslog |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Environment | |
Operating | Temperature: -10 ~ 60 degrees C for AC power input |
Storage | Temperature: -40 ~ 85 degrees C |
Datasheet
Date | Version | Description | Download |
|---|---|---|---|
2024-09-27 | 1.0 | IGS-R4215-24T4X |  |
Firmware
Date | Version | Description | Download |
|---|---|---|---|
2025-10-13 | 1.441b251001 | 1. Added the CloudNMS function to replace CloudViewerPRO. | |
2024-09-19 | 1.403b240911 | Upgraded Layer 2+ function (Static Route). | |
Quick Guide
Date | Version | Description | Download |
|---|---|---|---|
2024-09-20 | 1.2 | Modify contents of Quick Guide. | |
2024-07-26 | 1.1 | Add IGS-R4215-24P4X. | |
2024-03-20 | 1.0 | Initial release. | |
User's Manual
Date | Version | Description | Download |
|---|---|---|---|
2024-09-20 | 1.1 | Modify contents of user manual. | |
2024-05-13 | 1.0 | Initial release. | |
EC Declaration
Date | Version | Description | Download |
|---|---|---|---|
2024-12-16 | 1.0 | EC Declaration. | |
2024-11-26 | 1.0 | Declaration for FCC. | |
PhotoModelDescription
IGS-4215-8T4XIndustrial L2+ 8-Port 10/100/1000T + 4-Port 10G SFP+ Managed Ethernet Switch
IGS-4215-8T2SIndustrial L2/L4 8-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
IGS-4215-4P4TIndustrial 4-Port 10/100/1000T 802.3at PoE + 4-Port 10/100/1000T Managed Switch
IGS-4215-4T2SIndustrial L2/L4 4-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
MTB-Series Module10GBASE-LR/SR/BX/T Modules
MGB-2G Transceiver2500BASE-X SFP Transceiver
